Folding Arm Awnings

Our folding arm awnings work on a simple principle; fabric rolled around a rigid galvanised steel rollertube is connected to the awning front profile which is subsequently attached to 2 or more (dependent on system width - upto max 6) folding arms. The arms contain twin heavy duty stainless steel springs that attach to and are put under tension from hi-tensile intertwined steel cables. When the motor is operated, these arms push against the front profile, extending the awning and keeping the fabric taut at every position. The arms and all components attach to either a back profile which runs the width of the awning or a solid aluminium block to each end.

Full cassette casings around the fabric barrel and folding arms is typically featured on our retractable awnings to protect the material and operating mechanism from all types of inclement weather when retracted. Non and semi-cassette model awnings are also available.

A range of fixing brackets and options (dependent on model) allow a safe installation to all structure types. Optional freestanding or ground anchored frameworks are available to support our awnings where it is not possible to attach an awning to the facade or where the awning is to be positioned away from the building.